How Many Reps to Build Muscle? Rep Ranges Explained

By CoachAk · · 6 min read

How many reps to build muscle? Almost any number from about 5 to 30 works, as long as each set ends close to failure. Studies comparing heavy and light weights find similar muscle growth across that range, while heavier weights build more strength. For most people, doing most sets in roughly the 6 to 15 rep range is the practical sweet spot: efficient, kind to your joints and easy to judge.

How many reps to build muscle: the short answer

  • Roughly 5 to 30 reps a set all build similar muscle when the sets are hard.
  • Very light weights (well beyond that range) build less.
  • Heavier sets of fewer reps build more strength, but not more muscle.
  • Moderate reps, about 6 to 15, are the most practical default for most exercises.
  • Effort matters more than the number. Stop most sets about 1 to 3 reps short of failure.
  • Mixing rep ranges is fine, and many good programs do.

What the research says about rep ranges

The old gym rule, sometimes called the repetition continuum, said 1 to 5 reps build strength, 8 to 12 build size and 15 or more build endurance. The size part has not held up well.

  • A 2021 review by Schoenfeld, Grgic, Van Every and Plotkin, in the journal Sports, concluded that similar muscle growth can be achieved across a wide range of loads, from about 30% of your one-rep max upwards, rather than in one special "hypertrophy zone". Heavy loads were still clearly needed to maximise one-rep max strength.
  • A 2021 network meta-analysis by Lopez and colleagues, in Medicine & Science in Sports & Exercise, pooled 28 studies with 747 adults. Sets were taken to failure, with light loads defined as more than 15 reps, moderate as 9 to 15 and heavy as 8 or fewer. Muscle growth was similar whatever the load. Strength gains were bigger with heavy and moderate loads than with light ones.
  • In trained men, 25 to 35 reps grew as much as 8 to 12. In a 2015 study in the Journal of Strength and Conditioning Research, Schoenfeld and colleagues had 18 experienced lifters train three times a week for eight weeks, taking every set to failure. Arm and thigh muscle grew by similar amounts in both groups. The heavier group gained more squat strength (about 20% against 9%), while the lighter group improved more in a high-rep endurance test.

There does seem to be a lower limit. The 2021 review describes a study by Lasevicius and colleagues in which training at 20% of one-rep max produced roughly half the growth of heavier loads, and places the floor somewhere around 30%.

Why moderate reps make a good default

If 5 reps and 30 reps can both build muscle, why do so many programs live around 6 to 15? Because the extremes come with costs.

Rep range What it is good for The catch
Heavy (about 1 to 5) Maximal strength Needs more sets and time for the same growth, and more joint strain
Moderate (about 6 to 15) Efficient muscle growth Fewer drawbacks; the usual default
Light (about 15 to 30) Muscle growth when pushed hard More discomfort, and harder to judge how close to failure you are

Heavy sets take longer and cost more. In a 2014 study by Schoenfeld and colleagues, also in the Journal of Strength and Conditioning Research, trained men did either 7 sets of about 3 reps or 3 sets of about 10, with the total weight lifted matched. Arm muscle grew by the same amount. The heavy group gained a bit more bench press strength, but their sessions took about 70 minutes against about 17, the researchers noted they felt highly fatigued, and two dropped out with joint injuries. The 2021 review makes the same point: heavy loads need more sets to match the growth from moderate loads, and heavy loads with high volume add joint stress.

Light sets hurt more and are harder to judge. The 2021 review notes that light-load training tends to bring more discomfort and feels harder, which can make it harder to stick with. A 2022 review by Halperin and colleagues in Sports Medicine found that people underestimated how many reps they had left by about 1 rep on average, and that their guesses were less accurate in sets of more than 12 reps. With light weights, a set that feels close to failure often is not.

Effort matters more than the number

A rep range only works if the set is hard. Ten reps with a weight you could lift twenty times is not a hard set, and it will not build much.

  • Stop most sets about 1 to 3 reps short of failure. That is close enough to build muscle without the extra fatigue of going all the way; training to failure explains why.
  • Push light sets closer. The 2021 review stresses that effort matters most for growth when you use light loads.
  • Check yourself now and then. On a safe machine or isolation exercise, take a final set to failure. If you thought you had 2 reps left and got 6, your sets have been too easy.

Rep ranges for different exercises

There is no study that sets the perfect range for each exercise, so this is common coaching practice rather than a rule:

Exercise type A common rep range Why
Big barbell lifts: squats, deadlifts, bench and overhead presses About 5 to 10 Heavy enough to build strength, short enough that technique holds up
Machines, rows, pull-downs, lunges, leg presses About 8 to 15 A good balance of load and effort
Small isolation lifts: lateral raises, curls, calf raises, leg extensions About 10 to 20, sometimes more Light weights are easier on joints and safer to push close to failure

Many coaches keep heavy squats and deadlifts to lower reps because long sets can leave you out of breath, with technique slipping before the target muscles are worked hard. Small muscles on light exercises have the opposite problem: very low reps with a heavy dumbbell can turn into swinging the weight.

Should you mix rep ranges?

Mixing is common and sensible. The 2021 review found some evidence of a benefit to combining loading ranges in a program, though the authors were cautious about how much it matters in practice. The American College of Sports Medicine's 2009 position stand on resistance training suggests loads of 1 to 12 reps for muscle growth, used in a planned way, with emphasis on the 6 to 12 range, multiple sets and rests of 1 to 2 minutes.

A simple way to mix: start a session with a heavier compound lift in the 5 to 8 range, move on to moderate sets of 8 to 12, and finish with a lighter isolation exercise for 12 to 20.

How to use a rep range week to week

A rep range gives you a simple way to progress, called double progression:

  1. Pick a range, for example 8 to 12.
  2. Use a weight you can lift for 8 good reps, stopping about 1 to 3 reps short of failure.
  3. Add reps over the following sessions.
  4. When you reach 12 on every set, add a little weight and drop back towards 8.

Progressive overload explained walks through this with an example. How many hard sets to do each week is a separate question, covered in how many sets per week to build muscle.

How coaching helps

The rep numbers are the easy part. Choosing loads that are honestly hard, and progressing them week after week, is where most people go wrong. With one-to-one coaching from CoachAk, your program is written around your experience, equipment and injury history, with the sets and reps for every exercise, plus an effort target (RPE or reps in reserve), rest time and coaching cues where your coach adds them. You log each workout in the app, which flags personal bests, your coach can comment on your logged sessions, and you can send form-check videos for your coach to reply to. The weekly check-in takes about three minutes, and your coach's written feedback explains what changes next and why.

If you want a program with the right reps for you, apply for coaching.

Share this article:

WhatsAppFacebookXEmail

Free newsletter

New articles, straight to your inbox

Get new CoachAk articles by email: training, nutrition, contest prep and health, explained plainly.

Free. Unsubscribe any time. Your email address is used only for this newsletter, is never sold, and is not shared with anyone else unless the law requires it. Privacy policy