How to Write a Workout Program: A Step-by-Step Guide

By CoachAk · · 8 min read

Learning how to write a workout program is simpler than it looks. A good program answers seven questions: how many days you train, how you split them, which exercises you do, how many sets, how many reps and how hard, how long you rest, and how you will progress. Answer each one from the research, write it down, and follow it long enough to see whether it works.

How to write a workout program: the short answer

  1. Pick your training days: the number you can manage in a bad week, not a good one.
  2. Choose a split that trains each muscle about twice a week.
  3. Choose your exercises: one or two big compound lifts per session, then smaller exercises.
  4. Set weekly sets: about 10 to 20 hard sets per muscle group, starting near 10.
  5. Set reps and effort: most sets of about 6 to 15 reps, ending 1 to 3 reps short of failure.
  6. Set rest times: long enough to repeat a good set, usually 1.5 to 3 minutes.
  7. Write a progression rule, so you know exactly when to add reps or weight.
  8. Run it for several weeks, then review it from your training log.

Step 1: Decide how many days you can train

Start with your diary, not your ambition. Count the days you could train even in a busy, tired week, and build around that. A three-day program you complete beats a five-day program you keep half-finishing.

The American College of Sports Medicine's 2009 position stand on resistance training (Ratamess and colleagues, Medicine & Science in Sports & Exercise) gives a rough guide for muscle growth: 2 to 3 days a week for beginners, 3 to 4 for intermediate lifters and 4 to 6 for advanced lifters.

If you have a health condition or an injury, or are new to exercise, speak to your GP before you start.

Step 2: Choose a split

A split is just how you share out your muscles across the week. When the total number of sets is the same, research finds full-body and split routines build similar muscle, so choose the one that fits your days:

Days a week A sensible split
2 or 3 Full body every session
4 Upper body / lower body, twice each
5 Upper / lower, then push / pull / legs
6 Push / pull / legs, twice each

The best workout split covers the research and gives example weeks for each.

Step 3: Choose your exercises

Cover the main movement patterns and every major muscle group across the week:

Pattern Examples
Squat Back squat, leg press, hack squat, goblet squat
Hinge Romanian deadlift, hip thrust, back extension
Horizontal push Bench press, machine chest press, press-up
Vertical push Overhead press, dumbbell shoulder press
Horizontal pull Seated cable row, chest-supported row
Vertical pull Pull-up, lat pull-down
Smaller muscles Lateral raises, curls, triceps extensions, leg curls, calf raises

How to choose between them:

  • Order matters. The ACSM position stand advises doing large muscle groups before small ones, and multi-joint exercises before single-joint ones. Put your heaviest lift first, while you are fresh.
  • Pick exercises that suit your body and your gym. If a lift hurts your joints, swap it for one that trains the same muscle without pain. There is no exercise you must do.
  • Keep your list short. Four to seven exercises a session is plenty for most people.
  • Keep them for a while. You can only measure progress on an exercise you do repeatedly, so do not rotate your whole list every week.

Step 4: Set your weekly sets

For most people, about 10 to 20 hard sets per muscle group a week is a good range for building muscle, and around 10 is a solid place to start. A "hard set" is a working set taken close to failure; warm-ups do not count. Beginners can grow well on fewer.

Count sets for the muscle an exercise mainly trains. A simple shortcut is to count a set fully for the main muscle and as half for muscles that assist: a bench press set counts as one for chest and half for triceps. If you recover well and keep progressing, you can add a set or two to muscles you want to bring up; if your performance drops, pull back.

Step 5: Choose reps and effort

Reps. Muscle can grow across a wide range of reps. A 2017 meta-analysis by Schoenfeld and colleagues (Journal of Strength and Conditioning Research, 21 studies) found that light loads, 60% of your one-rep max or less, built similar muscle to heavier loads when every set was taken to failure. The heavier loads built more one-rep-max strength. In a 2021 review in Sports, Schoenfeld and colleagues concluded that muscle growth can be achieved across a wide spectrum of loads.

In practice, moderate reps are the easiest to work with. For building muscle, the ACSM position stand recommends loads you can lift about 8 to 12 times for beginners and intermediate lifters, and mostly 6 to 12 for advanced lifters. A simple scheme:

  • Big compound lifts: about 6 to 10 reps.
  • Other compound and machine exercises: about 8 to 12 reps.
  • Small isolation exercises: about 10 to 20 reps, where very heavy weights are awkward.

Effort. This is where most self-written programs fall down. Aim to finish most working sets about 1 to 3 reps short of failure. Stopping much earlier than that leaves growth on the table; going all the way on every set adds fatigue for little extra muscle. Save true failure for the last set of safer exercises, such as machines, curls or lateral raises. Training to failure explains how to judge reps in reserve, and why most people underestimate how many they have left.

Step 6: Set your rest times

Rest long enough to do your next set well. A 2024 meta-analysis by Singer and colleagues (Frontiers in Sports and Active Living) found a small benefit for muscle growth from resting more than 60 seconds between sets, and no clear extra benefit from resting more than about 90 seconds. For muscle growth, the ACSM position stand suggests 1 to 2 minutes for beginners and intermediate lifters, and 2 to 3 minutes on heavy compound lifts for advanced lifters.

As common practice, rest about 1.5 to 2 minutes on most exercises, and 2 to 3 minutes on heavy compound lifts if you need it to repeat your reps. If time is short, supersets (pairing exercises for different muscles) save time without cutting your sets.

Step 7: Write a progression rule

A program without a progression rule is just a list of exercises. Write down, in advance, what you will do when a set goes well. The simplest rule is double progression:

  1. Each exercise has a rep range, such as 8 to 12.
  2. Start with a weight you can lift for the bottom of the range at your target effort.
  3. Add reps over the following sessions.
  4. When you reach the top of the range on every set, add the smallest weight jump available and drop back to the bottom of the range.

The ACSM position stand gives a similar rule: increase the load by about 2 to 10% once you can do one or two reps more than your target. Progressive overload explained walks through an example.

An example day, written out

Here is how one session of a four-day upper/lower program might look on paper. Every column answers one of the steps above.

Exercise Sets Reps Effort Rest
Bench press 3 6 to 10 2 to 3 reps left 2 to 3 min
Chest-supported row 3 8 to 12 1 to 2 reps left 2 min
Incline dumbbell press 3 8 to 12 1 to 2 reps left 2 min
Lat pull-down 3 8 to 12 1 to 2 reps left 2 min
Cable lateral raise 3 12 to 20 0 to 1 reps left 1.5 min
Triceps pushdown 2 10 to 15 0 to 1 reps left 1.5 min
Dumbbell curl 2 10 to 15 0 to 1 reps left 1.5 min

Counting helper muscles as half, this day gives chest and back 6 hard sets each, and shoulders, biceps and triceps 5 or 6. Write the second upper day with different exercises for the same muscles and the same number of sets, and each upper-body muscle reaches 10 to 12 hard sets a week. Write the two lower-body days the same way, then check every muscle lands in the 10 to 20 range.

Step 8: Run it, log it, then review it

Log every set: the weight, the reps and how hard it felt. Then give the program time. Strength often rises within weeks, but muscle growth takes months to show, so judge it over several weeks, not one bad session.

When you review it, ask:

  • Are your lifts going up? If yes, change nothing.
  • Has one exercise stalled for several weeks? Change that one thing: the rep range, the variation, or a set.
  • Are several lifts going backwards, with poor sleep and low energy? You may need an easier week, with fewer sets, before carrying on.

Change one or two things at a time, for a reason, so you can tell what made the difference.

Common mistakes when writing your own program

  • Too much, too soon. Starting at 25 sets per muscle leaves nowhere to go. Start lower and add.
  • Sets that are too easy, because the rep target was hit with plenty left in the tank.
  • No progression rule, so the same weights are lifted for months.
  • Constant changes, which make progress impossible to see.
  • Ignoring weak points. If a muscle you care about gets only a few direct sets a week, it will lag.

How coaching helps

Writing a program is the easy part. Knowing what to change, and when, is where most self-coached lifters get stuck. With one-to-one coaching from CoachAk, your program is written for your schedule, experience, equipment and injury history, with sets and reps for every exercise, plus effort targets and rest times where your coach adds them. You log each workout in the app, which tracks your personal bests and shows your coach's comments, and you can send form-check videos for your coach to reply to. Each week you send a check-in that takes about three minutes, and your coach replies with written feedback and adjusts your program as you progress.

If you would rather have your program written and adjusted for you, apply for coaching.

Share this article:

WhatsAppFacebookXEmail

Free newsletter

New articles, straight to your inbox

Get new CoachAk articles by email: training, nutrition, contest prep and health, explained plainly.

Free. Unsubscribe any time. Your email address is used only for this newsletter, is never sold, and is not shared with anyone else unless the law requires it. Privacy policy